Jukka Rantanen

Jukka Rantanen

Head of Department

  • Administration and Operation

    Universitetsparken 2

    2100 København Ø

    Phone: +45 35 33 65 85Mobile: +45 28 43 77 17

  1. 2020
  2. Published

    Temperature-Modulated Micromechanical Thermal Analysis with Microstring Resonators Detects Multiple Coherent Features of Small Molecule Glass Transition

    Karl, M., Thamdrup, L. H. E., Rantanen, Jukka, Boisen, A. & Rades, Thomas, 2020, In: Sensors. 20, 4, 14 p., 1019.

    Research output: Contribution to journalJournal articlepeer-review

  3. Published

    Effects of humidity on cellulose pellets loaded with potassium titanium oxide oxalate for detection of hydrogen peroxide vapor in powders

    Kastvig, M. H., Hirschberg, C., van der Berg, Franciscus Winfried J, Rantanen, Jukka & Andersen, Mogens Larsen, 2020, In: Powder Technology. 366, p. 348-357 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  4. Published

    In silico design and 3D printing of microfluidic chips for the preparation of size-controllable siRNA nanocomplexes

    Li, Y., Bøtker, Johan Peter, Rantanen, Jukka, Yang, Mingshi & Bohr, A., 15 Jun 2020, In: International Journal of Pharmaceutics. 583, 11 p., 119388.

    Research output: Contribution to journalJournal articlepeer-review

  5. Published

    Medication Tracking: Design and Fabrication of a Dry Powder Inhaler with Integrated Acoustic Element by 3D Printing

    Li, Y., Bohr, A., Jensen, H., Rantanen, Jukka, Cornett, Claus, Beck-Broichsitter, M. & Bøtker, Johan Peter, 2020, In: Pharmaceutical Research. 37, 3, 10 p., 38.

    Research output: Contribution to journalJournal articlepeer-review

  6. Published

    Amino acids as stabilizers for spray-dried simvastatin powder for inhalation

    Lu, W., Rades, Thomas, Rantanen, Jukka, Chan, H. & Yang, Mingshi, 2020, In: International Journal of Pharmaceutics. 572, 12 p., 118724.

    Research output: Contribution to journalJournal articlepeer-review

  7. Published

    Single particles as resonators for thermomechanical analysis

    Okeyo, P. O., Larsen, P. E., Kissi, E. O., Ajalloueian, F., Rades, Thomas, Rantanen, Jukka & Boisen, A., 2020, In: Nature Communications. 11, 1, 11 p., 1235.

    Research output: Contribution to journalJournal articlepeer-review

  8. Published

    Influence of water of crystallization on the ternary phase behavior of a drug and deep eutectic solvent

    Palmelund, H., Boyd, B. J., Rantanen, Jukka & Löbmann, K., 2020, In: Journal of Molecular Liquids. 315, p. 1-7 113727.

    Research output: Contribution to journalJournal articlepeer-review

  9. Published

    Near infrared analysis of pharmaceutical powders with empirical target distribution optimization (ETDO)

    Pedersen, T., Rantanen, Jukka, Naelapaa, K. & Skibsted, E., 2020, In: Journal of Pharmaceutical and Biomedical Analysis. 181, 11 p., 113059.

    Research output: Contribution to journalJournal articlepeer-review

  10. Published

    Continuous Manufacturing of a Polymer Stabilized Emulsion Monitored with Process Analytical Technology

    Qwist, P. K., Sander, C., Bostijn, N., Jessen, V., Rantanen, Jukka & de Beer, T., 2020, In: AAPS PharmSciTech. 21, 5, 11 p., 154.

    Research output: Contribution to journalJournal articlepeer-review

  11. Published

    Effect of particle size and deformation behaviour on water ingress into tablets

    Skelbaek-Pedersen, A. L., Al-Sharabi, M., Vilhelmsen, T. K., Rantanen, Jukka & Zeitler, J. A., 2020, In: International Journal of Pharmaceutics. 587, 8 p., 119645.

    Research output: Contribution to journalJournal articlepeer-review

  12. Published

    Investigation of the effects of particle size on fragmentation during tableting

    Skelbaek-Pedersen, A. L., Vilhelmsen, T. K., Wallaert, V. & Rantanen, Jukka, 2020, In: International Journal of Pharmaceutics. 576, 12 p., 118985.

    Research output: Contribution to journalJournal articlepeer-review

  13. Published

    Non-destructive quantification of fragmentation within tablets after compression from scattering analysis of terahertz transmission measurements

    Skelbaek-Pedersen, A. L., Anuschek, M., Vilhelmsen, T. K., Rantanen, Jukka & Zeitler, J. A., 2020, In: International Journal of Pharmaceutics. 588, 9 p., 119769.

    Research output: Contribution to journalJournal articlepeer-review

  14. Published

    Quality by Design thinking in the development of long-acting injectable PLGA/PLA-based microspheres for peptide and protein drug delivery

    Zhang, C., Yang, L., Wan, F., Bera, H., Cun, D., Rantanen, Jukka & Yang, Mingshi, 2020, In: International Journal of Pharmaceutics. 585, 19 p., 119441.

    Research output: Contribution to journalJournal articlepeer-review

  15. Published

    Data-enriched edible pharmaceuticals (DEEP) of medical cannabis by inkjet printing

    Öblom, H., Cornett, Claus, Bøtker, Johan Peter, Frøkjær, Sven, Hansen, Harald S., Rades, Thomas, Rantanen, Jukka & Genina, Natalja, 2020, In: International Journal of Pharmaceutics. 589, p. 1-11 119866.

    Research output: Contribution to journalJournal articlepeer-review

  16. 2019
  17. Published

    Roadmap to 3D printed oral pharmaceutical dosage forms: Feedstock filament properties and characterization for fused deposition modeling

    Aho, J., Bøtker, Johan Peter, Genina, Natalja, Edinger, M., Arnfast, L. & Rantanen, Jukka, Jan 2019, In: Journal of Pharmaceutical Sciences. 108, 1, p. 26–35

    Research output: Contribution to journalJournal articlepeer-review

  18. Published

    The Use of 3D Printed Molds to Cast Tablets with a Designed Disintegration Profile

    Ajmal, A., Meskarzadeh, A., Genina, Natalja, Hirschberg, C., Bøtker, Johan Peter & Rantanen, Jukka, 26 Feb 2019, In: AAPS PharmSciTech. 20, 3, 10 p., 127.

    Research output: Contribution to journalJournal articlepeer-review

  19. Published

    Microfluidics-based self-assembly of peptide-loaded microgels: Effect of three dimensional (3D) printed micromixer design

    Borro, B. C., Bohr, A., Bucciarelli, S., Bøtker, Johan Peter, Foged, Camilla, Rantanen, Jukka & Malmsten, Martin, 7 Mar 2019, In: Journal of Colloid and Interface Science. 538, p. 559-568 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  20. Published

    Quantification of Inkjet-Printed Pharmaceuticals on Porous Substrates Using Raman Spectroscopy and Near-Infrared Spectroscopy

    Edinger, M., Iftimi, L., Markl, D., Al-Sharabi, M., Bar-Shalom, Daniel, Rantanen, Jukka & Genina, Natalja, Jul 2019, In: AAPS PharmSciTech. 20, 5, 10 p., 207.

    Research output: Contribution to journalJournal articlepeer-review

  21. Published

    Unidirectional drug release from 3D printed mucoadhesive buccal films using FDM technology: In vitro and ex vivo evaluation

    Eleftheriadis, G. K., Ritzoulis, C., Bouropoulos, N., Tzetzis, D., Andreadis, D. A., Bøtker, Johan Peter, Rantanen, Jukka & Fatouros, D. G., Nov 2019, In: European Journal of Pharmaceutics and Biopharmaceutics. 144, p. 180-192 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  22. Published

    Effects of Water on Powder Flowability of Diverse Powders Assessed by Complimentary Techniques

    Hirschberg, C., Sun, C. C., Risbo, Jens & Rantanen, Jukka, 2019, In: Journal of Pharmaceutical Sciences. 108, 8, p. 2613-2620

    Research output: Contribution to journalJournal articlepeer-review

  23. Published

    Improving Powder Characteristics by Surface Modification Using Atomic Layer Deposition

    Hirschberg, C., Jensen, N. S., Bøtker, Johan Peter, Madsen, Anders Østergaard, Kääriäinen, T. O., Kääriäinen, M., Hoppu, P., George, S. M., Murtomaa, M., Sun, C. C., Risbo, Jens & Rantanen, Jukka, 2019, In: Organic Process Research & Development. 23, 11, p. 2362-2368

    Research output: Contribution to journalJournal articlepeer-review

  24. Published

    Edible solid foams as porous substrates for inkjet-printable pharmaceuticals

    Iftimi, L., Edinger, M., Bar-Shalom, Daniel, Rantanen, Jukka & Genina, Natalja, Mar 2019, In: European Journal of Pharmaceutics and Biopharmaceutics. 136, p. 38-47

    Research output: Contribution to journalJournal articlepeer-review

  25. Published

    Determining Thermal Conductivity of Small Molecule Amorphous Drugs with Modulated Differential Scanning Calorimetry and Vacuum Molding Sample Preparation

    Karl, M., Rantanen, Jukka & Rades, Thomas, 6 Dec 2019, In: Pharmaceutics. 11, 12, 7 p., 670.

    Research output: Contribution to journalJournal article

  26. Published

    Determining short-lived solid forms during phase transformations using molecular dynamics

    Larsen, A. S., Olsen, M. A., Moustafa, H., Larsen, F. H., Sauer, Stephan P. A., Rantanen, Jukka & Madsen, Anders Østergaard, 2019, In: CrystEngComm. 21, 27, p. 4020-4024 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  27. Published

    Molecular structure and impact of amorphization strategies on intrinsic dissolution of spray dried indomethacin

    Li, Y., Rantanen, Jukka, Yang, Mingshi & Bohr, A., 2019, In: European Journal of Pharmaceutical Sciences. 129, p. 1-9

    Research output: Contribution to journalJournal articlepeer-review

  28. Published

    Stability of lysozyme incorporated into electrospun fibrous mats for wound healing

    Liu, X., Nielsen, L. H., Qu, H., Christensen, L. P., Rantanen, Jukka & Yang, Mingshi, 1 Mar 2019, In: European Journal of Pharmaceutics and Biopharmaceutics. 136, p. 240-249

    Research output: Contribution to journalJournal articlepeer-review

  29. Published

    Inhalable co-amorphous budesonide-arginine dry powders prepared by spray drying

    Lu, W., Rades, Thomas, Rantanen, Jukka & Yang, Mingshi, 30 Jun 2019, In: International Journal of Pharmaceutics. 565, p. 1-8 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  30. Published

    Exploring the chemical space for freeze-drying excipients

    Meng-Lund, H., Holm, T. P., Poso, A., Jørgensen, Lene, Rantanen, Jukka & Grohganz, Holger, 2019, In: International Journal of Pharmaceutics. 566, p. 254-263 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  31. Published

    Cryptopharmaceuticals: increasing the safety of medication by a blockchain of pharmaceutical products

    Nørfeldt, L., Bøtker, Johan Peter, Edinger, M., Genina, Natalja & Rantanen, Jukka, 2019, In: Journal of Pharmaceutical Sciences. 108, 9, p. 2838–2841

    Research output: Contribution to journalJournal articlepeer-review

  32. Published

    Imaging of dehydration in particulate matter using Raman line-focus microscopy

    Okeyo, P. O., Ilchenko, O., Slipets, R., Larsen, P. E., Boisen, A., Rades, Thomas & Rantanen, Jukka, 17 May 2019, In: Scientific Reports. 9, 11 p., 7525.

    Research output: Contribution to journalJournal articlepeer-review

  33. Published

    Tailor-made solvents for pharmaceutical use? Experimental and computational approach for determining solubility in deep eutectic solvents (DES)

    Palmelund, H., Andersson, M. P., Asgreen, Camilla Jantzen, Boyd, B. J., Rantanen, Jukka & Löbmann, K., 2019, In: International Journal of Pharmaceutics: X. 1, 9 p., 100034.

    Research output: Contribution to journalJournal articlepeer-review

  34. Published

    On-line rheological characterization of semi-solid formulations

    Qwist, P. K., Sander, C., Okkels, F., Jessen, V., Baldursdottir, S. & Rantanen, Jukka, 1 Feb 2019, In: European Journal of Pharmaceutical Sciences. 128, p. 36-42 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  35. Published

    Printing and Additive Manufacturing

    Rantanen, Jukka & Sandler, N., 2019, In: AAPS PharmSciTech. 20, 7, 1 p., 261.

    Research output: Contribution to journalEditorial

  36. Published

    Quantification of Fragmentation of Pharmaceutical Materials After Tableting

    Skelbaek-Pedersen, A., Vilhelmsen, T., Wallaert, V. & Rantanen, Jukka, Mar 2019, In: Journal of Pharmaceutical Sciences. 108, 3, p. 1246-1253

    Research output: Contribution to journalJournal articlepeer-review

  37. Published

    Effect of thermal and shear stresses in the spray drying process on the stability of siRNA dry powders

    Wu, J., Wu, L., Wan, F., Rantanen, Jukka, Cun, D. & Yang, Mingshi, 2019, In: International Journal of Pharmaceutics. 566, p. 32-39 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  38. 2018
  39. Published

    Transforming nanomedicine manufacturing toward Quality by Design and microfluidics

    Colombo, S., Beck-Broichsitter, M., Bøtker, Johan Peter, Malmsten, Martin, Rantanen, Jukka & Bohr, A., 2018, In: Advanced Drug Delivery Reviews. 128, p. 115-131

    Research output: Contribution to journalJournal articlepeer-review

  40. Published

    Analytical aspects of printed oral dosage forms

    Edinger, M., Jacobsen, Jette, Bar-Shalom, Daniel, Rantanen, Jukka & Genina, Natalja, 20 Dec 2018, In: International Journal of Pharmaceutics. 553, 1-2, p. 97-108

    Research output: Contribution to journalJournal articlepeer-review

  41. Published

    QR encoded smart oral dosage forms by inkjet printing

    Edinger, M., Bar-Shalom, Daniel, Sandler, N., Rantanen, Jukka & Genina, Natalja, 30 Jan 2018, In: International Journal of Pharmaceutics. 536, 1, p. 138-145

    Research output: Contribution to journalJournal articlepeer-review

  42. Published

    Quantification of microwave-induced amorphization of celecoxib in PVP tablets using transmission Raman spectroscopy

    Edinger, M., Knopp, M. M., Kerdoncuff, H., Rantanen, Jukka, Rades, Thomas & Lobmann, K., 30 May 2018, In: European Journal of Pharmaceutical Sciences. 117, p. 62-67

    Research output: Contribution to journalJournal articlepeer-review

  43. Published

    Additive manufacturing of prototype elements with process interfaces for continuously operating manufacturing lines: Formulation strategies and manufacturing technologies to enhance non-invasive drug delivery

    Hirschberg, C., Schmidt Larsen, M., Bøtker, Johan Peter & Rantanen, Jukka, 2018, In: Asian Journal of Pharmaceutical Sciences. 13, 6, p. 575-583 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  44. Published

    Using 3D Printing for Rapid Prototyping of Characterization Tools for Investigating Powder Blend Behavior

    Hirschberg, C., Bøtker, Johan Peter, Rantanen, Jukka & Pein-Hackelbusch, M., 2018, In: AAPS PharmSciTech. 19, 2, p. 941–950

    Research output: Contribution to journalJournal articlepeer-review

  45. Published

    Ultra Sensitive Micro String Resonators for Solid State Thermomechanical Analysis of Small and Large Molecules

    Karl, M., Larsen, P. E., Rangacharya, V., Hwu, E. T., Rantanen, Jukka, Boisen, A. & Rades, Thomas, 19 Dec 2018, In: Journal of the American Chemical Society. 140, 50, p. 17522-17531

    Research output: Contribution to journalJournal articlepeer-review

  46. Published

    Budesonide nanocrystal-loaded hyaluronic acid microparticles for inhalation: In vitro and in vivo evaluation

    Liu, T., Han, M., Tian, F., Cun, D., Rantanen, Jukka & Yang, Mingshi, 1 Feb 2018, In: Carbohydrate Polymers. 181, p. 1143-1152 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    Ciprofloxacin-loaded sodium alginate/poly (lactic-co-glycolic acid) electrospun fibrous mats for wound healing

    Liu, X., Nielsen, L. H., Klodzinska, S. N., Nielsen, Hanne Mørck, Qu, H., Christensen, L. P., Rantanen, Jukka & Yang, Mingshi, Feb 2018, In: European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V. 123, p. 42-49

    Research output: Contribution to journalJournal articlepeer-review

  48. Published

    Characterisation of pore structures of pharmaceutical tablets: A review

    Markl, D., Strobel, A., Schlossnikl, R., Bøtker, Johan Peter, Bawuah, P., Ridgway, C., Rantanen, Jukka, Rades, Thomas, Gane, P., Peiponen, K. & Zeitler, J. A., 5 Jan 2018, In: International Journal of Pharmaceutics. 538, 1, p. 188-214 27 p.

    Research output: Contribution to journalJournal articlepeer-review

  49. Published

    The use of molecular descriptors in the development of co-amorphous formulations

    Meng-Lund, H. M. L., Korgaard, G. K., Jensen, K. B. T., Poso, A., Pantsar, T., Rades, Thomas, Rantanen, Jukka & Grohganz, Holger, 1 Jul 2018, In: European Journal of Pharmaceutical Sciences. 119, p. 31 38 p.

    Research output: Contribution to journalJournal articlepeer-review

  50. Published

    Role of Solvent Selection on Crystal Habit of 5-Aminosalicylic Acid-Combined Experimental and Computational Approach

    Pudasaini, N., Parker, C. R., Hagen, S. U., Bond, A. D. & Rantanen, Jukka, Apr 2018, In: Journal of Pharmaceutical Sciences. 107, 4, p. 1112-1121

    Research output: Contribution to journalJournal articlepeer-review

  51. Published

    Ribbon density and milling parameters that determine fines fraction in a dry granulation

    Sun, W., Rantanen, Jukka & Sun, C. C., 1 Oct 2018, In: Powder Technology. 338, p. 162-167

    Research output: Contribution to journalJournal articlepeer-review

  52. Published

    Early assessment of bulk powder processability as a part of solid form screening

    Upadhyay, P. P., Pudasaini, N., Mishra, M. K., Ramamurty, U. & Rantanen, Jukka, Aug 2018, In: Chemical Engineering Research and Design. 136, p. 447-455

    Research output: Contribution to journalJournal articlepeer-review

  53. Published

    Insight into Nanoscale Network of Spray-dried Polymeric Particles: Role of Polymer Molecular Conformation

    Wan, F., Larsen, F. H., Nunes Bordallo, Heloisa, Foged, Camilla, Rantanen, Jukka & Yang, Mingshi, 2018, In: A C S Applied Materials and Interfaces. 10, 43, p. 36686-36692

    Research output: Contribution to journalJournal articlepeer-review

ID: 1305407